Browse by Manufacturer
Browse Categories
Price Ranges
Spyderco C101GP2
Spyderco C101GP2 Manix 2 - FFG CPM-S30V Blade - Plain Edge - Black G-10 Handle
SPC101GP2
THIS NEW FFG BLADE VERSION ONLY WEIGHS 4.9 OUNCES!
Retail: $150.95
Your Price: $83.05
You Save: $67.90 (45 %)

Detailed Description

Manix 2


A recipe for folding knife success: Start with hard-use rated lock. Add a blade made of exotic high carbon steel. Manufacture it in Golden, Colorado using precise tolerances then add a healthy dash of American innovation. These ingredients are the Manix 2, a concoction of solo features when combined make one of the strongest knives from Spyderco to date.
Patented by Spyderco, the Manix2 has a Ball Bearing Lock. It's a hardened free-floating ball bearing contained in a custom hi-tech polymer cage. The round ball bearing allows the lock to self adjust across a large surface, smoothly and consistently locking-up with solid confidence. Evolving over time, the Ball Bearing Lock's strength withstands hard work with a secure, versatile and comfortable grip. Ergonomics are peerless in this design. The blade is Crucible CPM S30V and flat-ground with aggressive thumb serrations (jimping) above a super sized 14mm Spyderco Round Hole. The Jimping doesn't stop there. With full steel liners the scales have jimping that extends beyond the G-10 handle scales scalloping areas of the handle's perimeter. This one is not slipping out of your hand and works well with gloves on! The liners pull double purpose by adding rigidly and lightweight strength to the handle. A three-screw clip is left/right-hand carry, positioned for comfort and deep pocket carry. The M2 also features a large lanyard pipe to protect various types of cords or thongs.
    Specs:
  • Blade Steel: CPM S30V
  • Handle Material: Black G-10
  • Length Open: 8" (203mm)
  • Blade Length: 3 3/8" (86mm)
  • Length Closed: 4 5/8" (117mm)
  • Hole Diameter: 9/16" (14mm)
  • Blade Thickness: 1/8" (3mm)
  • Weight: 4.9 oz. (139g)
  • Made In: USA

Product Reviews

(4 Ratings, 2 Reviews) Average Rating:
ratingratingratingratingrating
ratingratingratingratingrating
Great knife
Scott (Charlotte, NC) 3/6/2014 5:23 PM
I hated the ball bearing lock at first. I found it difficult to manipulate, and, because I insist on one-handed operation, I didn't think I could live with it. But it just took a little getting used to. Play with it awhile, and you'll find I'm right. If you're used to back locks, it takes some adjustment. As for the rest of the knife, you have a wonderful steel, great feel in the hand, very nice craftsmanship, and a true ambidextrous design. I still prefer my Manix2 XL, and knock this knife only because the blade is a bit too short for my preference, but it's wonderful just the same. And of course, thanks Cutlery Shoppe for being the best vendor out there.
ratingratingratingratingrating
Buy This Knife
Stewart Bunn (Overland Park, KS) 4/9/2013 10:11 PM
My Manix has been a daily-use work knife for over two years and the pivot and lock show no wear. I use my knives frequently and rigorously, so this is saying a lot. This is one of the best values in American-made knives and the service from Cutlery Shoppe is first rate.
Search
Shopping Cart
Your cart is empty.