ARMORER'S KIT
The ARMORER'S KIT contains SMOOTH-KOTE, BP2000 POWDER, HI-SLIP GREASE, and a TUF-CLOTH to treat the interiors and exteriors of all your firearms and equipment. One treatment provides dry film protection and lubrication for thousands of rounds, and makes cleaning as simple as brushing off.
What is the ARMORER'S KIT :
The Kit includes: SMOOTH-KOTE (Provides excellent lubrication and makes cleaning easier); BP2000 POWDER (Pure lubricants to fine-tune surfaces of bores, bolts, slides and trigger parts); HI-SLIP GREASE (A synthetic grease, specifically designed for firearms, that has the benefits of oil but will "stay put". Lubricates over a wide temperature range and will not wash off); and a TUF-CLOTH, (The revolutionary replacement for oil/silicone rags that provides superior dry-film corrosion protection and lubrication).
Directions:
Clean all surfaces of oil, powder/metal residues, rust, dirt, etc. using cleaners such as Gun Scrubber, Quick Scrub, alcohol or other solvents that do not leave a residue. Detail stripping, of the slide at least, is recommended. Allow cleaned surfaces to dry.
Apply SMOOTH-KOTE to all interior surfaces, including bore. Use brush, cotton applicators, dipping or spraying, etc. The coating will dry in 2 or 3 minutes and cure in 2 hours at room temperature or you can apply heat for 2 minutes. For quick clean up of SMOOTH-KOTE use alcohol pads or TUF-CLOTH.
Use BP2000 POWDER to fine tune surfaces treated with SMOOTH-KOTE or TUF-CLOTH, such as trigger parts, rails and bolt, etc. Use a patch, pipe cleaner or applicator to rub BP2000 vigorously into the surfaces.
Use HI-SLIP GREASE sparingly (a spot of grease about the size of a pin head) on high load or wear points. Most firearms do not require grease.
Use TUF-CLOTH to wipe exterior of firearm, magazines and magazine-well. To maintain firearm, after firing sequence, unload & inspect. Firearm can be cleaned with a dry, nylon-bristle brush. Then use the SMOOTH-KOTE precision applicator to touch up the wear points. TUF-CLOTH can be used to maintain the treated surfaces, the exterior, even wood and plastic components.
Excessive wiping with cloth can remove some SMOOTH-KOTE, BP2000. No solvent needs to be used prior to touching up with SMOOTH-KOTE. TUF-CLOTH provides cleaning & lubrication even to SMOOTH-KOTE'd areas.
Caution: SMOOTH-KOTE contains alcohol and is flammable. Keep away from flames. Keep away from children.
|
